1 Tap Tower European G Keg Type Beer Kegerator Keezer DIY Fridge Conversion Kit!
With our easy-to-use Kegerator Conversion Kits, you can quickly and economically transform almost any refrigerator or freezer into an amazing beer dispenser!
All of our kegerator conversion kits are made with high quality parts to give you years of reliable performance.
We use only food safe beverage and gas tubing that is extremely durable and highly kink-resistant, even at low temperatures.
Our faucets, regulators, and keg couplers are custom made to commercial draft equipment standards.
Door mount, tower, or portable versions available for almost any keg type.
Kits are quick and easy to assemble, with only minimal tools!
PLEASE NOTE: This kit is intended for USA customers. The keg coupler included in this kit fits "G" system beer kegs, but the Co2 regulator and optional tank use USA standards and hardware (CGA320).
THIS KIT INCLUDES:
- (x1) Dual Gauge Co2 Regulator
- (x1) Single Faucet Chrome Beer Tower (3” Diameter, 12” Tall)
- (x1) Standard Beer Faucet
- (x1)"G" System Keg Coupler. Fits many European keg types, but check with your keg store if you're not sure what
- coupler type you need.
- (x1) Stainless Steel Drip Tray
- (x1) 8’ of Food Grade Beer Line, 3/16” ID (installed on tower)
- (x1) 4’ of Food Grade Air Line, 5/16” ID
- (x1) Rubber Faucet Caps
- (x1) Line Cleaning Brush
- (x1) Faucet/Tower Wrench
- (x1) Rubber Base Gasket
- (x1) Chrome Finish flange ring for base
- (x4) 1/4" Mounting Screws
- All Necessary Washers, Hose Clamps, and other hardware
- Co2 System Troubleshooting Guide
- Instruction Booklet
- OPTIONAL ADD ON: Brand New 5lb Aluminum Co2 Tank! NOTE: ALL TANKS ARE SHIPPED EMPTY, BUT READY TO FILL AT YOUR LOCAL GAS SUPPLIER!
COMPONENT FEATURES:Dual Gauge Co2 Regulator With Chrome Finish This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions! Pressure adjustment knob allows you dial in your pressure and lock it in place with a built-in lock nut.
Features a low pressure gauge for adjusting the pressure to your keg, and high pressure gauge to tell you how much co2 you have left in your tank.
- Durable and Stylish Chrome Body
- 3000 PSI (tank pressure) Gauge
- 60 PSI (keg pressure) Gauge
- Automatic Safety PRV with manual pull ring
- CGA320 Inlet Stem (Standard for USA) with fixed tank washer - greatly reduces chances of co2 leaks!
- Threaded post on back for bracket/wall mounting
- Shutoff Valve
Attractive, durable chrome finish and high quality hardware make these towers a great choice for your kegerator or other draft beer system!
- Tower Column (3” Diameter, 12” Tall)
- Chrome Finish Flange for Base
- Rubber Base Gasket
- (x4) 1/4" Mounting Screws
- 8 ft of 3/16” ID Food Safe Beverage Tubing
- Tower/Faucet Wrench
- Rubber Tap Cover
- 2.5" Plastic Faucet Handle
Standard Chrome Beverage Faucets
Our standard chromed brass beer faucets are a quality choice for any budget! Durable construction and attractive finish make these a great choice for most beverage applications! Includes 2.5" black plastic handle.
“G” System "German Slider" Keg Coupler
Lets you connect to many common European beer keg types. Just lift the lever, twist into place, and drop the lever to tap your keg.
Sturdy stainless steel drip tray to with removable grate for easy emptying.
Faucet/Tower Combo Wrench
Makes installing or removing faucets and tower shanks easy! This 2-in-1 tool can remove hard-to-reach tower shank nuts, and includes a pin wrench for tightening/removing faucet collars.
Faucet Cleaning Plug Brush
These handy brushes are perfect for cleaning faucet spouts, plus they act as a tap cover to keep fruit flies out of your faucet when it’s not in use.
2 Headed Cleaning Brush
Clean every part of your kit, including the tubing, faucets, and other hard-to-reach places! Features a different size brush on each end of a flexible handle. Durable wire construction and stiff bristles make this a must have tool for any draft beer system!
5lb Aluminum Co2 Tank (OPTIONAL)
Brand new, high quality co2 tank with attractive brushed aluminum finish. All tanks have CGA320 valves (USA standard for co2) and current inspection stamps for easy refilling at your local welding or beverage shop! ALL TANKS ARE SHIPPED EMPTY!