1 Tap Tower European S Keg Beer Dispenser Kegerator Keezer DIY Conversion Kit!

  • $344.99

Build your own KEGERATOR or KEEZER!

Our DIY Kegerator Conversion Kits make it easy to quickly and economically transform any suitable refrigerator or freezer into an amazing beverage dispenser!

All our kegerator conversion kits use high quality components to give you years of reliable performance.

We use only durable and highly kink-resistant food safe beverage and gas tubing.

Most kits can be assembled in less than 30 minutes, with only basic hand tools!

PLEASE NOTE: This kit is intended for USA customers. The keg coupler included in this kit fits "S" system beer kegs, but the Co2 regulator and optional tank use USA standards and hardware (CGA320).


  • (X1) High Quality Dual Gauge Co2 Regulator
  • (X1) "S" System Keg Coupler (Standard for many European kegs.  Check with your keg store if you're not sure what coupler type you need)
  • (X1) 4" Door/Wall Shank with Tailpiece Barb
  • (X1) Standard Chrome Beer Faucet
  • (X1) 4x6" Stainless Steel Drip Tray
  • (X1) 5' of Food Safe Gas Tubing
  • (X1) 8' of Food Safe Beverage Tubing
  • (X1) Tubing Cleaning Brush
  • (X1) Faucet Cleaning Brush
  • (X1) Rubber Faucet Cap
  • (X1) Faucet Wrench
  • All Necessary Washers, Hose Clamps, and Other Hardware
  • Co2 System Troubleshooting Guide
  • Installation Instruction Booklet


Dual Gauge Co2 Regulator With Chrome Finish
This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Pressure adjustment knob allows you dial in your pressure and lock it in place with a built-in lock nut.
Features a low pressure gauge for adjusting the pressure to your keg, and high pressure gauge to tell you how much co2 you have left in your tank.
  • Durable and Stylish Chrome Body
  • 3000 PSI (tank pressure) Gauge
  • 60 PSI (keg pressure) Gauge
  • Automatic Safety PRV with manual pull ring
  • CGA320 Inlet Stem (Standard for USA) with fixed tank washer - greatly reduces chances of co2 leaks!
  • Threaded post on back for bracket/wall mounting
  • Shutoff Valve

Attractive, durable chrome finish and high quality hardware make these towers a great choice for your kegerator or other draft beer system!
  • Tower column (3” Diameter, 12” Tall)
  • Chrome finish flange for base
  • Rubber base gasket
  • (x4) 1/4" Mounting screws
  • 8 ft of 3/16” ID food safe beverage tubing
  • Tower/Faucet wrench
  • Rubber tap cover

Standard Chrome Beverage Faucets
Our standard chromed brass beer faucets are a quality choice for any budget! Durable construction and attractive finish make these a great choice for most beverage applications! Includes 2.5" black plastic handle.

Chrome Wall/Door Shank with Tailpiece
Solid brass construction with durable chrome finish. Includes shank, faucet nut, shank hex nut, and plastic finish flange.

“S” System Sanke Keg Coupler
Used for many (but not all!) European beers, including Amstel, Newcastle, Heineken, St. Pauli Girl, Stella Artois, and more. Just lift the lever, twist into place, and drop the lever to tap your keg. Check with your local keg store if you're not sure what coupler type you need.

Stainless Steel Drip Tray
Catch any drips with this sturdy, easy-to-hang drip tray. Removable grate and pre-drilled keyholes for easy emptying.

Faucet Wrench
Make installing or removing faucets easy! High quality metal construction with rubber coated handle for easy grip also protects the finish of your faucets!

Faucet Cleaning Plug Brush
These handy brushes are perfect for cleaning faucet spouts, plus they act as a tap cover to keep fruit flies out of your faucet when it’s not in use.

2 Headed Cleaning Brush
Clean every part of your kit, including the tubing, faucets, and other hard-to-reach places! Features a different size brush on each end of a flexible handle. Durable wire construction and stiff bristles make this a must have tool for any draft beer system!

5lb Aluminum Co2 Tank (OPTIONAL)
Brand new, high quality co2 tank with attractive brushed aluminum finish. All tanks have CGA320 valves (USA standard for co2) and current DOT certification stamps. All tanks are shipped empty, but ready to fill at your local beverage gas supplier!

QUESTIONS? Contact us, we love talking about this stuff!

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods